Speaker Upgrades

Discussion in 'All Things Technical' started by buggygx, Mar 19, 2016.

  1. buggygx

    buggygx Member

    Blobeye here, wondering what speaker upgrades I could do, the originals are ruddy awful.
    Looks to be 2 front and 2 rear. Ideally looking for something that fits factory, dont want to be making mounts etc.

    What has everyone else upgraded to?
  2. buggygx

    buggygx Member

    I've sorted this now, for reference I got some 13cm (5.25 I beleive) fronts with adapters and 4" rear.
  3. ProdriveWagon

    ProdriveWagon 3rd Scoob = an ej20 engined Hatch

    I did Infinity 6.5 up front with spacers, kenwood amped, left the rears as they were wasted down in the footwells, just set the balance to +7 front
    Which 5.25 speakers did you go for?
    I have my eyes on some Alpines (SPG-17CS / SPR-17S) for when i get around to doing the new one
  4. thatscoobyrocks

    thatscoobyrocks Well-Known Member

    Ditto Darren's comments, run 6.5 " Alpine Type R's up front with spacers, sound deaden doors, forget rears, amped to get the max RMS. The only issue with the newer Alpine speakers is they cut out if they are pushed too hard :banghead: So I set them at their limit.
    ProdriveWagon likes this.

Share This Page