induction help needed

Discussion in 'All Things Technical' started by Silver Angel, Jun 10, 2010.

  1. Silver Angel

    Silver Angel Active Member

    bought this :
    [​IMG]

    problem is dont think its gonna fit in my bay do i need some kind of adaptor to make it fit ??

    [​IMG]

    [​IMG]
     
  2. AndrewC

    AndrewC Active Member

  3. Slik50

    Slik50 New Member

    :lol: ^^^^ :lol:

    Does that adaptor plate in your pic not bolt to your maf sensor then the filter to the adaptor?
    Looks like your ABS might be in the way a little so you may have to rip that out as its not needed anyway :lol:
     
  4. markscooby

    markscooby Active Member

  5. Silver Angel

    Silver Angel Active Member

  6. njberrie

    njberrie New Member


    lmao your so polite andrew, corrine it will fit where the induction box is on a slight angle or as i told you previously get some more pipe and put it into the wing :wink:

    but will defo fit there instead of box just angle the elbow :wink:
     
  7. Silver Angel

    Silver Angel Active Member

    thank you nathan :D
     
  8. njberrie

    njberrie New Member

    or alternatively drop it off and il do it for you and not even charge for the privelage
     
  9. CAMS

    CAMS LADS Sponsor

    i have a adapter pipe to make it fit correctly :wink:
     
  10. nevo

    nevo New Member

    Always got the answer :lol: :lol: :lol:
     
  11. Silver Angel

    Silver Angel Active Member

  12. Obey 1

    Obey 1 Well-Known Member

    induction

    send it back get money back
     
  13. Silver Angel

    Silver Angel Active Member

    apparently so eh :( not much positive attitude
     
  14. TunnelMeister

    TunnelMeister Lifetime & Founder Member

    Hi Corrine, I ran one of those on the 22 for a while. They are tricky to fit without interferring with other stuff/bonnet due to the larger diameter. I would not suggest it be fitted in the wing, you stand a chance of dragging water through in bad weather.

    After popping a couple of mafs the one I have sits on a shelf in my garage and the 22 now runs more bhp/lbsft with a standard panel filter.

    Sorry it's another negative-ish post. :oops:
     
  15. Silver Angel

    Silver Angel Active Member

    thats ok

    just I have heard so many different things these last couple days since I got one and through going to shows and looking at scoobs there seemed to be loads of scoobs running with induction kits and all seem fine im kinda stuck what to do now :( to be honest I wanted it for the noise
     
  16. TunnelMeister

    TunnelMeister Lifetime & Founder Member

    Errm... what noise?
     
  17. Silver Angel

    Silver Angel Active Member

    :oops: :oops: :oops: they have a noise a whooshin kinda noise
     
  18. TunnelMeister

    TunnelMeister Lifetime & Founder Member

    Not so you'd notice Corrine, and really only at high revs when driving? A good dv would give a better sound perhaps. :wink:

    The filter you have tends to make more of a 'rumble' really and it's not that loud, sorry. :oops:

    It's also going to suck in all the hot air from under the bonnet btw. Not good in summer.
     
  19. Silver Angel

    Silver Angel Active Member

    no prob - cheers
     
  20. TunnelMeister

    TunnelMeister Lifetime & Founder Member

    Perhaps a committee meeting under your bonnet at the Sunday meet might give you some idea's. :D
     

Share This Page