Driver window

Discussion in 'General LADS chat' started by SUELEE-PC, Jan 24, 2020.


    SUELEE-PC New Member

    Hiya guy's. I have a jdm sg9 forester and all of a sudden my driver side window has stopped working, the other three are fine. Used to hear some clicking from the switches but all worked well. My question is, is there some sort of reset I can do, or do I need to get a set of switches/motor. Thanks for any help or advice.
  2. ELV1S

    ELV1S Administrator

    Sounds like the motor has packed in to me Lee
  3. Riley STI

    Riley STI Active Member

    SG9 normal faults with window not working .
    1 window motor
    2 window switch (water damage in switch)
    3 window regulator holding bolt coming loss or falling off.
    If you have power probe or a test light you can check it really easy.
    Just take the door card off and found the window motor ( you can't miss it)
    Unplug the connector from motor use a test light or multimeter place it in one side of the connector pin on the wire harness side and work the window switch.
    If you get a good power signal from this it mean the window motor dead or if no power signal the window switch is dead.
    Hope this help ?

    SUELEE-PC New Member

    Thanks for the advice

Share This Page