HELP

Discussion in 'All Things Technical' started by marc, Feb 12, 2012.

  1. marc

    marc New Member

    My wife has a 2005 2.0 legacy non turbo and when i came to put some water in the washers this morning i pulled the bonnett release catch and its either snapped or come loose.I now cannot open the bonnett.Any ideas on how i can do this bearing in mind i have 2 left hands.


    Thanks

    Marc
     
  2. Obey 1

    Obey 1 Well-Known Member

    depending were it has snapped can you get a grip of the cable through the grill just a thought
     
  3. marc

    marc New Member

    Can i remove the grill without lifting the bonnett :?:
     
  4. Maddogpro

    Maddogpro New Member

    UKLEGACY.COM
     
  5. dogma1

    dogma1 New Member

  6. Graphite

    Graphite 23rd June 2016 - Vote LEAVE EU!

    Dogmas pic looks to be the right model.

    I can't see how you would get the grille off without lifing the bonnet!

    I can get some pics for you if it would help...

    Being dragged out shopping just now - but will PM my mobile No. if I can help.

    Good luck

    Mick
     
  7. dogma1

    dogma1 New Member

    i don't think you could take the grille off as the upper radiator crossmember is where it clips in and that well under bonnet. i would if i was you start working from inside car out
     
  8. marc

    marc New Member

    Fixed now.Thanks for everybodys help :D Pulled cable from inside car using pliers instead of lever and it just popped. :D
     

Share This Page