has anybody fitted these only using the oem connector and earth feeds together to ground on the car ,also i have tried a fitting and can not seem to get clearance on the power steering cooler pipes to have the horns left and right situated
undo the bracket holding the pipe and turn it round and bend it a bit, it will give you just enough room to fit them,there is a fitting guide on scooby net if you can find it
i thought the perrin kit was for the later models had a look at them and american based also will look at the bracket turn around cheers
not all imprezas have the oil cooler pipe,and of those that do some have a plain pipe but some have a row of fins all along them that make it an even tighter fit ,the car in the pictures for the perrin kit doesnt have the pipe
i do like that set up with the kit but i think i mite try the reverse bracket and bend back towards the rad
